Furnace Oil Pyrolysis Equipment

[somchaisale]

Furnace Oil Pyrolysis Equipment

Day by day, waste tire, waste plastic, waste rubber, waste oil cause serious environmental pollution.
Most people have no idea about how to dispose of these house waste or industry
waste.
Burning, landfill, actually are not the right way to solve the problem.
We have the honor to introduce you the green technology for waste recycling.
Waste tire recycling machine, waste plastic recycling machine, also named as pyrolysis equipment.
Waste engine oil recycling machine, oil residue recycling machine, also named as distillation equipment.
After being processed, all the tire or plastic will be fully recycled, most percent are turned into fuel oil, the others are carbon black and fuel gas. It does not cause secondary pollution.
Meanwhile at most area of the world, the cost of raw material is very low. Because actually they are waste things.  People are willing to cooperate with you as waste management. After recycling these waste things are turned into treasure.

Raw Material and Output:

1. The raw material can be: waste tires, plastic, rubber and oil sludge

2. Total Capacity: 5 tons/day, 6 tons/day 8tons/day, 10 tons/day, 12 tons/day

3. Size of the reactor: 2.2*6m, 2.6*6 m, 2.6*6.6m, 2.6*8m, 2.8*6m

4. Average oil yield: 45% of fuel oil

5. Average carbon black output: 35%

6. Average steel output: 12%

7. Average gas output: 8%

8. pyrolysised gas composition: C1-C36

9. Actual pressure: 0.02 MPa

Our equipments have three links:
The first link is making the crude oil .
The second link is making the diesel through the fractionation.
The last link is the color and odor removal.through these three links,you can get good quality oil. 

1.working process:
Firstly ,put the raw material into furnace, seal the feed inlet system.
secondly,burn the fuel material(coal,wood,or natural gas ,oil ) in the combustion system .the reactor will slowly heat ,when the temperature
reach around 250 degree celsius,it will produce oil gas .
oil gas will be processed by our technology ,then gone to cooling system to cold liquid oil.
the gas which can not liquid under normal pressure ,which will be designed to back to combustion system to
instead the fuel material to burn the reactor which can save energy very much .
after finishing oil produce ,the temperature of reactor will go down ,in the same time ,carbon black will be discharged automatically.
Lastly,when the temperature fall to 100 degree celsius,worker could open the door of reactor to discharge of steel wire, then can start another batch working.

2.Main features :
Safety:
1. With an auto welding machine for the reactor, it can not only greatly improve working efficiency but also guarantee the quality of welding seam, thus avoid explosion caused by gas leak.
2. Vacuum system will prevent oil gas from  going back to reactor and causing accident.
3. Professional thermometer, pressure gauge and safety valve.
4.It is dangerous to burn exhaust gas(C1 to C4) without any safety measures. In our process, it is transferred first through the safety device and a safety burning air muzzle. Before burning, we should ensure the safety of production
Environment friendly:
1.Well water dedusting system can avoid black smoke.
2.The exhaust gas will be recycled for heating reactor, no gas pollution.
3.Every junction of the reactor is in good sealing situation with professional sealing material.
Long service life:
1.Material: Q345R special steel plate ,thickness 16mm.
2. Automatic welding machine.
3. The service life of the reactor will be 8 years.
Energy saving:
1. Well sealing for heating system , no gas leak and saving fuel.
2. The exhaust gas will be recycled for reactor heating.

3. Features
1) Safety: DINTER tire pyrolysis plant is equipped with many safety measures such as pressure gauge, safety valve and alarming devices. If there is extra pressure inside the reactor, alarming system will be ring, if no workers hear this, do not worry, the safety valve will be automatically to decrease inside pressure. Besides oil-water separator and anti-back fire device stop the waste gas back into reactor so that we avoid the possibility that burning gas go back into reactor, then we avoid the dangerous of explosion.

2) Higher oil yield rate: DINTER tire pyrolysis plant adopted the most advanced independent cooling system we concentrate on pre-long the cooling time and increase cooling area so that cool more oil gas and get more oil. Besides we use catalyst when we pyrolysis tire, so that we can make fully pyrolysis for tires and increase make full use of the tire materials and make good quality oil. At same time with our 20 years experience of making tire oil, our engineer can transfer our best operation skills which how can make more oil.

3)Environmental friendly : DINTER tire pyrolysis plant have a whole set of carbon black discharging system which can collect the carbon black under the sealing condition it is very clear. After collecting carbon black into bags, we can use carbon black fuel machine to turn the carbon black into fuel then u can make money from carbon black. Besides smoke from burning coal or wood can be filtered by our dust removing system, draft fan and cooling chimney will further remove the dust. At last emission from chimney no color no smelling and no pollution.

4) Energy saving: DINTER tire pyrolysis plant is equipped with waste gas (methane, ethane, propane, hydrogen etc) recycling system, which can recycle the gas back into the furnace to heat reactor. Fuel is also a cost for customers, this system can save customers' cost at same time we protect our environment.

5) Fully Automatic: DINTER tire recycling plant is fully automatic. Our plant is equipped with auto-feeder, which can put 10 ton tires into reactor with 2-3 hours instead of manpower loading with 6-7 hours. From feeding to discharging all the process is automatic. We called "Idiot Plant", it means our plant is very easy to operate, as it is very highly automatic. If you wanna know more our plant regarding automatic, pls send us inquiry, we will offer more details.

6) After-sales service: After purchasing our plant, we would send our engineer to instruct your workers to install your plant at same time training your workers how to operate plant correctly. Each of engineer from our company has many years experience of installation and making tire oil. Operating plant correctly decides tire oil yield rate directly and your workers' safety.

7) Running plant factory: Dinter factory owns the biggest demo plant factory, where there are completed installed semi-continuous tire pyrolysis plants, continuous tire pyrolysis plant, semi-continuous and continuous waste oil distillation plant etc. Besides our oil product lab is same with plant factory. If u wanna see the running plant, that is best choice.

Company concept: "shared, happy, growing", we regard "no perfect individual, only perfect team "as our motto. We will go from strength to strength in the process of sharing and happy, we will try our best to offer satisfied service and grow up with customers from over the world.



 

Henan Dinter Heavy Industry Machinery Co., Ltd., Experts in Manufacturing and Exporting waste/used tyre recycling machine,waste rubber pyrolysis machine and 11561 more Products. A Verified CN Gold Supplier on Alibaba.com.

Quick Details

Type: Q345R waste plastic pyrolysis fuel oil
Place of Origin: Henan China (Mainland)
Brand Name: Dinter
Model Number: DT-10
Voltage: 380V
Power(W): 20KW
Dimension(L*W*H): 2600mm*6600mm
Weight: 10 tons
Certification: CE& ISO
Warranty: 1 year
After-sales Service Provided: Engineers available to service machinery overseas
Raw materials: waste tyre/ waste plastic/ waste rubber
End-product: carbon black/ fuel oil/ steel wire
Thickness: 16mm
Material of Reactor: Stainless steel/Q345R boiler steel
Diameter/Length: 2200mm/6600mm
Reactor type: horizontal
Fuels: wood,coal,waste gas etc.
Quality: national inspection-free product
Color: any color as your request
light oil : heavy oil: 70% : 30%

Packaging & Delivery

Packaging Detail: Q345R waste plastic pyrolysis fuel oil : container or flat rack container,somtimes according to customers'requirements.

Delivery Detail: 15 days after we receive your 30%deposit

Specifications

1.Q345R waste plastic pyrolysis fuel oil
2.used turn to fuel oil
3.free pollution
4.16mm steel plate
5.CE&ISO